Pump Accessories

Intelligent Pump Controller

iQpump Intelligent Pump Controller

The iQpump1000 drive was designed with the pump service operators and pump system owners in mind. iQpump1000 offers ease of setup and comprehensive pump and motor protection features.

 

The integrated pump-specific software and setup parameters allow the operator to set up specific control values for a wide range of applications. iQpump1000 will automatically adjust pump operating conditions, as the process variables change while still maintaining optimum pump performance and protection.

 

Most existing systems, which require constant pressure or flow control, are using bypass lines, pressure release values, throttling valves, or impeller trim adjustments. The most efficient method is pump speed control. Pump speed control will reduce energy consumption, while maintaining system optimization.

 

The iQpump1000 drive can be configured for Simplex, Duplex, Triplex, or up to an eight-pump system. One iQpump1000 drive can be used as a master, which can also control one or two secondary pump motors. The secondary pump motors can be connected using mechanical motor starters, reduced voltage soft starters, or additional iQpump1000 drives. The software is structured in such a way that it only has a few basic pump parameters to be set up to run this application.

 

The iQpump1000 drive from Yaskawa is available from 3/4 to 500 horsepower. In addition to Irrigation Pumps in Commercial and Residential applications, the iQpump1000 drive is suitable for a variety of other pumping applications such as Pressure Booster Pumps, Submersible Deep Well Pumps, Storage Tank Level Control, and Metering Pumps.

 

 

Literature:

Complete WEBTROL Industrial Catalog Price List

Helpful Tools

iQpump Intelligent Pump Controller
Webtrol logo

The iQpump1000 drive was designed with the pump service operators and pump system owners in mind. iQpump1000 offers ease of setup and comprehensive pump and motor protection features.

 

The integrated pump-specific software and setup parameters allow the operator to set up specific control values for a wide range of applications. iQpump1000 will automatically adjust pump operating conditions, as the process variables change while still maintaining optimum pump performance and protection.

 

Most existing systems, which require constant pressure or flow control, are using bypass lines, pressure release values, throttling valves, or impeller trim adjustments. The most efficient method is pump speed control. Pump speed control will reduce energy consumption, while maintaining system optimization.

 

The iQpump1000 drive can be configured for Simplex, Duplex, Triplex, or up to an eight-pump system. One iQpump1000 drive can be used as a master, which can also control one or two secondary pump motors. The secondary pump motors can be connected using mechanical motor starters, reduced voltage soft starters, or additional iQpump1000 drives. The software is structured in such a way that it only has a few basic pump parameters to be set up to run this application.

 

The iQpump1000 drive from Yaskawa is available from 3/4 to 500 horsepower. In addition to Irrigation Pumps in Commercial and Residential applications, the iQpump1000 drive is suitable for a variety of other pumping applications such as Pressure Booster Pumps, Submersible Deep Well Pumps, Storage Tank Level Control, and Metering Pumps.

 

Literature:

Complete WEBTROL Industrial Catalog Price List

Helpful Tools

8417 New Hampshire Ave.

St. Louis, MO 63123 USA

800-769-7867